铝型材测量工具如何保养?_SG电子游戏资讯

SG电子游戏平台

铝板生产厂家

铝型材测量工具如何保养?

来源:http://www.bahaihub.com  发布时间:2020-01-10 15:23:46  

  在铝型材生产中,测量工具就像检验员手中的武器。如果武器处于半瘫痪或损伤状态,测试结果毫无意义,对产品质量没有监督作用。因此,量具的保养是非常重要的。以下是铝板生产厂家测量工具(通用测试工具)的一些维护规范:
  In the production of aluminum profiles, measuring tools are like weapons in the hands of inspectors. If the weapon is in a semi paralyzed or damaged state, the test results are meaningless and have no monitoring effect on product quality. Therefore, the maintenance of measuring tools is very important. The following are some maintenance specifications for measuring tools (general testing tools) of aluminum plate manufacturers:
  1.量具存放处应保持清洁和干燥,远离振动和腐蚀性气体,远离温度和磁场大的地方。量具存放于盒内清洁干燥,勿存放其它杂物。

铝板生产厂家
  1. The storage place of measuring tools shall be kept clean and dry, away from vibration and corrosive gas, and away from places with high temperature and magnetic field. Store the measuring tools in the box clean and dry, do not store other sundries.
  2.使用测量工具后,清洗表面污迹和铝屑,松开紧固装置,长时间(1个月以上)不使用时,在测量表面涂防锈油。当量具不使用时,应将其放入保护箱内,由专人专职使用,并凭年检记录做好量具工作。
  2. After using the measuring tools, clean the surface stains and aluminum chips, loosen the fastening device, and when it is not used for a long time (more than 1 month), coat the measuring surface with antirust oil. When the measuring tool is not used, it shall be put into the protection box and used by special personnel, and the measuring tool work shall be well done with the annual inspection record.
  3.不要用油石、砂布摩擦量具的测量面、测量面和标记部分。
  3. Do not rub the measuring surface, measuring surface and marking part of the measuring tool with oilstone and emery cloth.
  4.当工件表面有毛刺时,必须去除净毛刺并进行测量,否则会磨损测量工具,影响测量结果的准确性。
  4. When there is burr on the surface of the workpiece, the burr must be removed and measured, otherwise the measuring tools will be worn and the accuracy of the measurement results will be affected.
  5.的秘密。不要用手触摸测量工具的测量表面,因为手上的汗水等潮湿、肮脏的东西会污染测量表面,使其生锈。不要将量具与其它量具、金属材料混合使用,以免碰撞量具。
  5. Do not touch the measuring surface of the measuring tool with your hand, because sweat and other wet and dirty things on your hand will pollute the measuring surface and make it rusty. Do not mix the measuring tool with other measuring tools and metal materials to avoid colliding with the measuring tool.
  6.不要将卡尺的量具尖端用作划针、指南针或其他工具。
  6. Do not use the measuring tool tip of the caliper as a scriber, compass or other tool.
SG电子游戏平台   以上介绍了铝型材测量工具的保养方法,想要了解更多关于铝型材的相关产品信息,欢迎访问网站:http://www.bahaihub.comThe maintenance methods of aluminum profile measuring tools are described above. For more information about aluminum profile products, please visit http://www.jndclyxgs.com